Double Glazed Window Repair
The majority of double-glazed windows come with a guarantee, and it's worth checking the scope of this warranty. It usually covers any problems with window hardware, like hinges and locking mechanisms, within the first 10 years.
The mist that forms between the glass windows is usually caused by a break in the seal and needs to be repaired quickly to prevent damp or mould growing in your home.
Condensation Between the Windows
If you notice condensation appearing between your windows, it is an indication that the seal in the gas insulating the windows has failed. This is a serious problem that needs to be addressed promptly, especially in winter, when humidity levels are at their highest. This could also cause damage to sills, sealant and mould.
Ideally double-glazed windows shouldn't have condensation between the panes. However, it's not unusual for high humidity or an extremely cold snap to cause this issue. The issue can usually be resolved without the need to replace an entire window. A professional can drill tiny holes in the window and spray special cleaning solution inside. The moisture is then removed from the window and an anti-fogger system can be added to prevent any further buildup of moisture in the future.
Condensation can also occur between the windows as a result of air leakage, or other causes outside the window. In this case it could take longer for the condensation in the window to build up because the air must be warm enough to evaporate the water molecules. In these cases, it is better to replace double-glazed windows instead of trying to repair the sealed units.
A double-glazed glass window is composed of two or more pieces of insulated tempered glass that are held together by a metal frame. The gap between the two of the window is filled with a non-toxic insulating gas such as argon or krypton and then sealed. The seal stops the insulating gases from leaving and also stops moisture and air from getting into the gap.
As windows age, the seals weaken and allow moisture to enter the gaps between the glass panes. When seals fail it is crucial to notice this because it indicates that the double glazing no longer performs as efficiently as it did before. This could result in lower energy efficiency, a rise in heating costs, a damaged property, and the possibility of condensation between the windows.
Mist
If you have condensation on the outside of your windows, this is perfectly normal and means that your double-glazed is functioning properly and retaining the heat inside your home. The condensation develops because the air outside is warmer than the glass and reaches its dew point before the window. Double glazing that is of the highest quality is a fantastic method to achieve this.
If you notice condensation on the inside of the window, it could be a sign of an issue with ventilation in your home. This is because the extra moisture has no place to go and is deposited on your window or in carpets, furniture, and in other areas in your home. It is possible to prevent this by having it inspected by an expert and ensuring that there is enough fresh air inside your home.
Another reason for mist to appear on double-glazed windows is that the seal between two glass panes has broken. This could be due to wear and wear or chemical cleaning solutions that are being used. If this happens the best solution is to get the windows repaired as soon as you can.
A professional repair of your windows will ensure they remain fog-free, free of condensation and free of misting. This is also much cheaper than replacing your windows and you will save money on your energy bill.
A FENSA registered window installer can provide you with a quote for repair or replacement of your double-glazed windows. If your existing windows are very old and have been in use for a long time, you might want to consider changing them to new A-rated energy efficient windows.
It is a very good idea to keep copies of any warranties and agreements with your window fitting company. This can be extremely helpful should any issues with the windows arise in the future, and you can then contact your fitters to resolve these issues. This is a better option than ignore the issues that will only get worse and could lead to other issues within the home.
Close or open without difficulty
It's not only annoying when double-glazed windows are difficult to open or close. They can also result in higher energy bills because of the loss of heat and draughts. It could also be a security issue, particularly when the locks aren't functioning correctly. You should fix any double-glazed windows and doors in the earliest time possible.
If you've attempted to open your window using the most basic methods, such as using a screwdriver or tapping on the frame with a solid object the issue could be more serious. The window may have shifted and requires a reset or there could be a gap between the glass and frames. In either case you should consult a double-glazing repair specialist to ensure the repairs are done correctly and to prevent further problems.
It isn't uncommon for UPVC window handles and lock mechanisms to get stuck or unusable, especially when they are worn out and worn. This is due to an accumulation of dirt or grease inside the handle and can often be solved by cleaning it with a uPVC cleaner. If this does not work, try tapping the uPVC with the help of a screwdriver. Be Repair My Windows And Doors not to harm the handle or window handle mechanism.
If this doesn't resolve the problem then the window may need to be replaced as it is likely that the hinges aren't properly aligned, or the locking mechanisms are damaged. In this case you should speak to a UPVC window expert.
David The Window Wizard specialises in all technical aspects of double-glazed window and door repair including fixing a jammed or shut double glass window. He has lots of experience converting old window mechanisms into modern ones. This can save you money on replacing the entire window. Contact us today for more information or a no-cost quote.
Warping
Double-glazed windows are typically an excellent option to save energy in your home. They are made up of two distinct panes, with a spacer gas or air between the panes, creating a seal to keep cold air out and warm air in. However, over time windows can be damaged or broken and require repair. The majority of these repairs can be made without the need to replace the entire window.
One common problem that double glazed windows experience is warping. The windows begin to flex or twist, or bow. This can affect the structural integrity and insulating capabilities of the window. Double-glazed windows should be properly installed and maintained to avoid this problem.
Contact a specialist as soon as you notice that your double-glazed windows are sagging. This will help to prevent the situation from getting worse. They will be able inspect your windows to pinpoint the root cause. They will use specific tools to correct the problem and ensure that you windows are completely sealed.
Water vapour can cause this issue because it can accumulate between the windows over time. It can be caused by many factors, such as weather conditions, humidity levels and temperature fluctuations. To fix this the expert will make a small hole through the window to release the moisture. The specialist will use a cleaner on the glass to cleanse it, then apply a sealant.
If your windows can't be opened or shut it could be due to a malfunctioning mechanism or hinges. It is worth trying to grease these parts of the window before calling in a professional, since this will often resolve the issue and reduce the necessity for replacements. If your windows are quite old or don't provide the insulation you would like to see it is usually better to replace them.